Skip to main content

Dry Soda Blasting Technology for Safe Abrasive Cleaning

Dry Soda Blasting   sodablasting

Above: Before and After of Heat Exchanger Tubes cleaned with Cleanco's Dry SodaBlasting     

Industrial cleaning with blasting technology removes material by forcing particulates on to a surface under high pressures. Dry Soda blasting removes surface grime without having to clean and remove waste water or cause further damage or spills.

In some cases, bead blasting with fine Glass Beads may be recommended for your industrial or commercial cleaning application. Glass blast is an abrasive blast cleaning alternative with engineered sandblast particulates that are environmentally safe. 

The worst problem in blasting is the presence of moisture in the system. This presents itself minimally as a surging at the blast nozzle to a complete clogging of the blast machine, cutting off the flow completely. Another problem is that wet air will cause flash rusting to the surface being blasted. The BA-375 was originally developed to be used in operations where there is a zero tolerance for moisture, namely SodaBlasting. The power driven heat exchanger lowers the air temperature down to within 2 degrees of ambient. This essentially drops the water out of the compressed air. The water is then trapped by highly efficient coalescing moisture collectors keeping moisture from going into the operating machinery, such as the blast machine.

Blast cleaning of heat exchanger tubes

Above: Very fouled heat exchanger was made to look like new by our Soda Blasting Technolgy at the Clean-Co Systems cleaning facility in Houston, Texas.

blast cleaning machine

Why choose dustless blasting for industrial cleaning?

Clean-Co's Dustless Blaster is the fastest, most cost effective and environmentally friendly surface preparation tool there is. The machine does everything that a sandblaster can do, but better. The uses for our Dustless Blaster are too vast to list, but suffice it to say that this machine can remove virtually any type of coating from any material. How does it work? The Dustless Blaster mixes abrasive material and water in the blast tank. Imagine throwing a handful of wet sand VS a handful of dry sand. The dry sand wouldn't have much impact on the target, but it would blow in the wind and make a big mess. The same amount of wet sand would hit the target with more force, and wouldn't blow in the wind. The water adds more mass and energy to the blast, while preventing dust. 

Dustless Blaster

12V DC Powered Aftercooler Moisture Removal System for Portable and Stationary Abrasive Blasting

 

Abrasive Blasting System

The Dustless Blaster Gets it Done Faster!

Clean-Co's Dustless Blaster can remove mortar, concrete, grout, paint and just about anything else we've tried it on. Whatever the job, the Dustless Blaster can get it done faster!

Call for a comprehensive assessment of Glass and Sodablasting for your specific equipment.

We are the experienced, trusted provider of Glass and Soda Blasting
Call 1-866-922-2626 now for a free estimate.

We offer Glass and Soda Blasting services nationwide.

Contact Us